- If a camera is unplugged, broken, tampered then the last available MOTION DETECTION FRAMES ARE STORED.
- If ContaCam is closed or the computer running ContaCam is turned off then the last MOTION DETECTION FRAMES ARE NOT RECORDED (if that's a problem use ContaCam's 24h recording which is storing everything up to the last frame).
- ContaCam automatically reopens re-plugged USB, DV or network devices. Frames from before being unplugged and the ones after the re-plugging are ALL STORED BY THE MOTION DETECTION ENGINE.
↧
Are ContaCam systems failure/intrusion safe?
↧